VTech ES2001 User Manual

46
47
Change the system PIN
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose BS SETTINGS,
and then press to select.
3. Press ▼/▲ to choose CHANGE PIN,
and then press to select.
• OLD PIN? - - - - displays; - - - -
cursor flashes.
• Default 4-digit PIN is 0000.
• Press to delete.
• The PIN will be masked as
****
.
4. Enter the current 4-digit PIN and then
press to confirm.
• If the old PIN is correct, it will show
NEW PIN? - - - - with - - - - cursor
flashes.
5. Enter the new PIN, and press .
6. Re-enter the new PIN to double
confirm.
7. Press to save.
Turn on/off ECO mode
You can reduce transmission power by
setting the ECO mode.
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose BS SETTINGS,
and then press to select.
3. Press ▼/▲ to choose ECO MODE,
and then press to select.
4. Press ▼/▲ to choose ON or OFF.
• OFF
+
is the default setting.
5. Press to save.
• Press to return to previous
menu.
Register a handset
When your handset is deregistered
from the telephone base, follow the
steps below to register it back to the
telephone base.
1. Remove the handset from the
telephone base.
2. Press when the phone is not in
use.
3. Press ▼/▲ to choose REGISTRATION,
and then press to select.
• PIN? - - - - displays; - - - - cursor
flashes.
4. Enter the 4-digit system PIN, and
press . (Default: 0000)
Press and hold at the telephone
base for about five seconds.
• PLEASE WAIT displays.
• REGISTER! displays if the handset
fails to register to the base.
• If handset is registered to the
base sucessfully, the base will
assign next available handset
number to the handset
automatically.
• You hear a beep when the
registration process completes.
• The registration process takes
about 60 seconds complete.
NOTE
• If your handset is new, make sure
you charge it before attempting
registration.
Reset phone settings
You can reset your phone to the default
settings. After reset, all settings and
entries (except phonebook) will be
deleted.
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose DEFAULT, and
then press to select.
• PIN? - - - - displays; - - - - cursor
flashes.
3. Enter the 4-digit system PIN, and
press . (Default: 0000)
4. Press to confirm.

VTech ES2001 Specifications

General

Brand	VTech
Model	ES2001
Category	Cordless Telephone
Language	English