14
15
ES2050 series
Connect the charger
Charge the battery
Place the handset in the telephone base
or charger to charge.
ES2000 series
ES2050 series
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table below).
Battery
indicators
Battery
status
Action
flashes
Battery has
no charge
or very little
charge. The
handset
cannot be
used.
Charge
without
interruption
(at least 30
minutes).
→
→
→
Battery icon
animates
when
charging.
If full battery
charging is
reached, the
icon will stop
animation in
cycle even
the handset is
on charging
cradle.
steadily on
Battery is
charged.
To keep
the battery
charged,
place it in the
telephone
base
or charger
when not in
use.
When it is fully charged, you can
expect the following performance:
Operation Operating time
While in handset use
(talking*)
18 hours
While not in use
(standby**)
10 days
* Operating times vary depending
on your actual use and the age of the
battery.
** Handset is not charging or in use.
NOTES
• Place the handset in the charger will
bypass the set date and time, and
voice guide.
• For best performance, keep the
handset in the charger when not in
use.
• The battery is fully charged after 16
hours of continuous charging.
• If you place the handset in the charger
without plugging in the battery, the
screen displays No battery.
1
2
To Next Page
Loading...
Need help?
General
