44
If the telephone is not responding normally,
put the handset in the telephone base. If it
does not respond, try the following (in the
order listed):
Disconnect the power to the telephone
base.
Disconnect the batteries on the handset.
Wait a few minutes before connecting
power to the telephone base.
Re-install the batteries and place the
handset in the telephone base.
Wait for the handset to synchronize with
the telephone base. Allow up to one
minute for this to take place.
•
•
•
•
•
This telephone is not equipped with a grounding function.
Therefore, some of the functions may be limited when
used in PBX systems. Please contact the technical
support of the network provider for further information.
To Next Page
Loading...
