VTech ES2310A - Store a Call List Number into the Phonebook; Delete an Entry in the Call List; Delete the Entire List of the Call List

34

A 4-digit system PIN code is used for changing the system
settings of the base station. It is used to protect your phone
against unauthorized use. The default system PIN code is
0000.
Press then
p
q
to select .
Press then
p
q
to select .
Press .
Enter the old system .
Press then enter the new system .
Press then enter the new system  again.
NOTE
If the new PIN entered in Step 6 is not matched with the new
system PIN entered in Step 5, you are requested to enter the
valid system PIN again in Step 5.
7. Press to confirm.

You can set the ECO range to HALF RANGE or FULL
RANGE. When ECO range is set to HALF RANGE, the
radiation between the base and handset will be lower, as well
as the range of the base.
Press and
p
q
to select .
Press and
p
q
to select .
Press and
p
q
to select  or 
.
Press to confirm.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.