VTech FS2615A - Find the Handset (PAGING); Make an Internal Call

24
.BLFBO*OUFSOBM$BMM
This feature is only applicable when there are at least two
registered handsets. It allows you to make internal calls, transfer
external calls from one handset to another handset and make
conference calls. If the called handset is not answered within
60 seconds, the called handset will stop ringing and the calling
handset will return to standby mode.
$BMM"OPUIFS)BOETFU
In idle mode, press . The screen displays all registered
handsets except the calling handset.
Enter the desired handset number to intercom with.
The called handset rings and press
on the called
handset to establish the internal call.
NOTES
If only one handset is registered to the base station, press
and it will display “/051044*#-&”.
If only two handsets are registered to the base station, press
will connect to another handset immediately.
$BMM"MM)BOETFUT
In idle mode, press and the screen displays all
registered handsets.
Press to ring to all registered handsets.
5SBOTGFSBO&YUFSOBM$BMMUP"OPUIFS)BOETFU
During an external call:
Press
and
S
T
to select */5&3$0..
Press
and
S
T
to select the desired handset to
intercom with.
1.
2.
3.
•
•
1.
2.
1.
2.