VTech IS7256-3 - Overview; Handset Display Icons; Handset Alert Tones

24
25
8
MUTE/
DELETE/
VOICE
• When the handset is
not in use, press to
activate the voice-
controlled application
of connected cell
phone.
9
• Press to display the
menu.
• Once in the menu,
press to select an item
or save an entry or
setting.
10
CALL BLOCK
• Press to block the
incoming call when
the telephone is
ringing.
• When on a call, press
to block the call.
• When the handset is
not in use, press to
show the call block
menu.
11
• Hang up a call.
• Return to the previous
menu or idle mode
without making
changes.
• Delete digits while
predialing.
• Silence the handset
ringer temporarily
while the phone is
ringing.
• Erase the missed call
indicator while the
handset is not in use.
12
• Press and hold to set
and turn on the QUIET
mode, or turn it off.
• When reviewing a
caller ID log entry,
press repeatedly to
view other dialing
options.
13
PTT (PUSH TO
TALK)
• Press to initiate a one-
to-one or one-to-
group broadcast.
• Press and hold to
broadcast to a group
of system devices.
14
REDIAL/
PAUSE
• Review the redial list.
• Insert a dialing pause
while dialing or
entering numbers
into the directory.
Handset display icons
1
• The battery is low
and needs charging.
2
• The battery is
charging.
3
• The battery is fully
charged.
4 • Handset ringer is off.
5
• New voicemail
received from your
telephone service
provider.
6
NEW
• There are new Caller
ID log entries.
7
ANS ON
• Answering system is
on.
8
MSG#
5/10
• Number of new/old
messages recorded.
9
ECO
• The ECO
mode activates
automatically to
reduce power
consumption when
the handset is
within range of the
telephone base.
Handset alert tones
1 short
beep
• A key is pressed.
• Plays at the end of each
message playback.
• End of recording.
1 long
beep
• Beginning of recording.
• Plays at the end of all
messages playback.
2 short
beeps
• Error tone. The
command has failed.
• You have reached the
beginning or end of the
list.
• You have reached the
minimum or maximum
listening volume.
3 short
high-
pitched
beeps
• Confirmation tone.
The telephone has
completed the
command successfully.
4 short
beeps
• Low battery warning.