VTech IS7256-3 - Phone Menu Operations; Caller ID Features

52
53
Redial a call from list
• When the desired redial entry
displays on the handset, press
HOME/FLASH or to dial
using the home line, or press
CELL to dial using the cell line.
- OR -
• When the desired redial entry
displays on the telephone base, press
HOME to dial using the home line,
or press CELL to dial using the cell
line.
- OR -
Using a cordless handset
1. Press HOME/FLASH or to use
the home line, or press CELL to use
the cell line.
2. Press REDIAL/PAUSE to enter the
redial list.
3. Press q CID, p DIR or
REDIAL/PAUSE repeatedly to browse
until the desired entry displays.
4. Press MENU/SELECT to dial the
displayed number.
Using the telephone base
1. Press HOME to use the home line,
or press CELL to use the cell line.
2. Press REDIAL/PAUSE to enter the
redial list.
3. Press q CID, p DIR or
REDIAL/PAUSE repeatedly to browse
until the desired entry displays.
4. Press MENU/SELECT to dial the
displayed number.
Save a redial entry to the directory
1. Press REDIAL/PAUSE on the handset
or telephone base in idle mode.
2. Press q CID, p DIR or
REDIAL/PAUSE repeatedly to browse
until the desired number displays.
3. Press MENU/SELECT twice.
4. The screen displays Enter number. Use
the dialing keys to edit the number, if
necessary.
• Press q CID or p DIR to move the
cursor to the left or right.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
5. Press MENU/SELECT.
6. The screen displays Enter name. Use
the dialing keys to enter a name (up to
15 characters). Press a key repeatedly
until the desired character shows on
the screen.
• Press q CID or p DIR to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
7. Press MENU/SELECT. You hear a
confirmation tone.
Delete a redial list entry
1. Press REDIAL/PAUSE to enter the
redial list.
2. Press q CID, p DIR or
REDIAL/PAUSE repeatedly to browse
until the desired entry displays.
3. Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to delete the
displayed number. You hear a
confirmation tone.
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
directory, caller ID log or redial list while
you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes) from
the directory, caller ID log or redial list.
Access a number from the directory
while on a call
1. Press MENU/SELECT.
2. Press MENU/SELECT to select
Directory.
3. Press q CID or p DIR to scroll to
the desired entry or perform an
alphabetical search, then press
MENU/SELECT to dial the displayed
number.
Access a number from the caller ID log
while on a call
1. Press MENU/SELECT.
2. Press q CID or p DIR to scroll
to Caller ID log, then press
MENU/SELECT.
3. Press q CID or p DIR to scroll
to the desired entry, then press
MENU/SELECT to dial the displayed
number.