2. Push the handle as illustrated below. If you cannot see the whole
screw head, continue to turn the handle anticlockwise until you can
see the whole screw head exposed.
3. Pull out the handle as illustrated.
4. Attach the head tube clamp onto the head tube of the bicycle.
NOTE: It is recommended to mount the camera on the head tube of the
bicycle instead of the handle bar as illustrated.
6. Align the tripod screw hole on the Kidizoom
®
Action Cam 180° to the
screw of the bicycle mount. Tighten the screw on the bicycle mount
Kidizoom
®
Action Cam 180° to the mount.
ACCESSORIES
Handle bar
Head tube
Cross bar
To Next Page
Loading...
