NOTES ON wATERPROOF CASE USAGE TECHNICAL
SUPPORT
metres) for 30 minutes with the camera inserted.
safety standards.
operation water temperature range of 0°C to 40°C. Otherwise,
moisture condensation or water leakage may occur and damage the
camera.
strong impact, such as from being dropped.
humid place for a long period of time. If you cannot avoid leaving the
camera under direct sunlight, be sure to cover it with a towel or other
protection.
malfunction. To use the camera again, leave it in a cool place for a
while to allow the camera’s temperature to drop.
the waterproof case in warm water.
warm, fresh water afterwards.
Notes
and videos you take may appear less clear than out of water.
the sound level will be reduced.
remains in good condition using the below directions.
Inspect the O-ring
O-ring. If anything is found, wipe off with a soft cloth.
ACCESSORIES
To Next Page
Loading...
