VTech Kidizoom Action Cam 180 User Manual

28
7. The Kidizoom
®
Action Cam 180 is afxed to the bicycle and ready to
use. Loosen the Angle Adjustment Handle and then you can rotate
the Angle Adjustment Arm to adjust the capture angle.Tighten the
Angle Adjustment Handle after you set the capture angle.
Using the Adhesive Mount
1. Attach the Adhesive Flat Mount to the Mounting Attachment as
illustrated. You will hear a clicking sound when the attachment is
seated correctly.
2. Ensure the surface on which you would like to afx the adhesive
mount on is clean and smooth.
Note: If there is dirt or liquid on the surface or the surface is rough, the
adhesive performance will be affected.
3. Remove the protective cover of the adhesive surface and stick it on a
clean, at, smooth surface.
Note: If the surface is not very at or a bit curved, such as a helmet,
add the extra two Double-Sided Adhesive Tape Strips (included)
onto the Adhesive Flat Mount to improve the amount of contact area
between the surface and the Adhesive Flat Mount.
Remove the protective covers of the Adhesive Flat Mount and the
extra Double-Sided Adhesive Tape Strips, then stick the two tape
strips onto both tips of the adhesive surface of the Adhesive Flat
Mount before sticking the Adhesive Flat Mount to the surface you
would like to stick it on.
Note: Maintain this pressure for several minutes to increase the
adhesive bond strength.

VTech Kidizoom Action Cam 180 Specifications

General

Brand	VTech
Model	Kidizoom Action Cam 180
Category	Action Cameras
Language	English