VTech Kidizoom Smart Watch DX2 User Manual

9
SPLASH PROOF FOR EvERYDAY PLAY
• Do not put under running water.
• Do not submerge in water and do not wear whilst showering, bathing
or swimming.
• Keep the rubber cover of the Micro-USB Port closed tightly while
it is not in use in order to prevent any water from getting inside the
watch.
TO BEGIN USING THE
KIDIzOOM
®
SMART WATCH DX2
Make sure that the Master Power Switch is set to the
ON position and that the battery is fully charged
before using the watch.
To wake the watch, either press the Home Button
, Shutter Button , or double-tap the
screen.
When turning on the watch for the first time, the date and
time setting screen will display first. Swipe up or down
over the day, month, year, hours and minutes to set the
current date and time. Tap the tick icon when you're
done.
When the clock appears on screen, press the Home
Button to go to the Home Menu. Press the Shutter Button to take
photos and videos.
AUTOMATIC SCREEN OFF
To preserve battery life, the screen will automatically shut off after a
short period of time when in Clock Mode.
Note: The automatic screen off time can be adjusted in Settings /
Advanced / Auto Screen Off. Please refer to the Settings section in
this guide. From other activities, the watch screen will return to Clock
Mode automatically if there is no input for 1 minute. When the watch is
in Camera Mode, it will automatically exit after 3 minutes of inactivity.
When in Slideshow Mode, the automatic exit time is approximately 15
minutes.

VTech Kidizoom Smart Watch DX2 Specifications

General

Memory	256 MB internal memory
Age Range	4 to 12 years
Display	Color touchscreen
Battery	Rechargeable lithium-ion
Connectivity	Micro USB
Features	Games, photo effects, motion sensor
Water Resistance	Splash proof
Compatibility	Works with VTech Learning Lodge