CONNECTING TO A COMPUTER
You can connect the Kidizoom
®
Smart Watch DX2 to a PC or Mac
computer using the included Micro-USB Cable. To transfer files
between your watch and computer, follow these steps:
• Pull up the rubber cover of the Micro-USB Port on the side of the
watch.
• Insert the Micro-USB Cable (small end) into the Micro-USB Port on
the watch.
• Insert the larger end of the cable into a USB port on your computer.
A USB port is usually marked with this symbol:
• You will see a removable drive called VTech 1938, please use this
to transfer files to and from the watch. There is another removable
drive called VT SYSTEM, which is for storage of system data and
should not be accessed by users.
Note: Once the watch is connected to your computer, do not
disconnect the watch whilst files are transferring. Only when your
watch completes transferring files should you eject it from your
computer. Once ejected, you can then physically disconnect the watch
from the computer.
To Backup Photos or Videos Taken with Kidizoom
®
Smart Watch
DX2:
• Locate and open the DCIM folder on the removable drive VTech
1938.
• Copy and paste the photo and/or video files to a location on your
computer.
To Backup Sounds Recorded with Kidizoom
®
Smart Watch DX2:
• Locate and open the VOICE folder on the removable drive VTech
1938.
• Copy and paste the files to a location on your computer.
To Transfer Photos or Videos to Kidizoom
®
Smart Watch DX2:
• First, select the photo or video files you would like to transfer from
your computer.
• Locate and open the DOWNLOAD folder on the removable drive
VTech 1938 and copy and paste the photo or video files into the
PHOTO or VIDEO subfolders.
Note: Do not transfer photo or video files created by other cameras
(except for other Kidizoom
®
camera photo or video files) to the
Kidizoom
®
Smart Watch DX2, as these files may not be compatible.
To Next Page
Loading...
Need help?
General
