VTech LS6475-2 - Head Band Installation

Getting started
10
Head band installation
To attach the head band to the headset:
Remove any headset attachment (earbud excluded) currently connected to
the headset.
To wear the headset on your right ear, insert the end [A] of the head band into
the rotating clip [B] on the headset until it clicks into place.
1.
2.
To wear on your left ear, hold the headset on one hand and the head band with
your other hand. Rotate the head band within the rotating clip on the headset.
Adjust the head band to fit your head. Adjust and rotate the angle of the headset
until the microphone is pointing towards your mouth. Firmly grip the earpiece
with one hand whenever adjusting the headset microphone up or down.
3.
[B]
[A]