A
C
A
D
A
P
T
O
R
AC Adaptor AC Adaptor
• Use a standard 9V
300mA
AC/DC adaptor. We recommend the use
of a VTech
®
9V AC/DC adaptor.
• Make sure the unit is turned
OFF.
• Plug the power jack into the 9V socket
at the upper right corner of the unit (see
illustration).
• Plug the AC adaptor into a wall socket.
NOTE:
1. The use of an adaptor will override the batteries. When the toy is not going to be in use
for an extended period of time, unplug the adaptor.
2. When disconnecting any plugs from the
MobiGo™ or wall outlet, carefully pull by the plug
itself rather than by the cord.
3. When you finish playing, always turn the
MobiGo™ off and unplug the AC adaptor from
both the wall socket and the MobiGo™.
4. Do not wrap the AC adaptor cord around the
MobiGo™, or it may damage the touch
screen.
5. To preserve energy,
MobiGo™ will automatically turn off after several minutes without
input. Press the ON/OFF button to turn the MobiGo™ on again.
STANDARD GUIDELINES FOR ADAPTOR TOYS
• The toy is not intended for use by children under 3 years old.
• Only use the recommended adaptor with the toy.
• The transformer is not a toy.
• Never clean a plugged-in toy with liquid.
• The toy is not be connected to more than the recommended number of power
supplies.
• Do not leave the toy plugged-in for extended periods of time.
4
To Next Page
Loading...
Need help?
General