VTech RM5764HDV2 - Basic Operation: Powering Units; Powering Baby and Parent Units

16
Basic Operation
After powering up your video monitor, the parent unit streams live video in Direct
mode. We recommend you follow the instructions on screen to set up a home
Wi-Fi network connection with your monitor for mobile/tablet remote access
and receiving firmware updates. See
Download app for mobile access
in this
manual.
Power on/o󰀨
1�
Slide the
ON
switch to power on or o󰀨 your baby unit.
Notes:
• Please peel o󰀨 the lens/screen protector before use.
• The status LED is set to o󰀨 by default. You can turn it on using the app (Setting > Camera
Setting > LED status).
• When powering up, the baby unit’s orange status LED turns on. It will turn o󰀨 after a while
and remain o󰀨 if the status LED is set to o󰀨.
• A steady orange light with no video or audio streaming can indicate a fault condition.
•
WARM
WARM
The baby unit may get warm during use. This is normal.
Power on
Power o