VTech RM5764HDV2 - Resetting Parent and Baby Units; Reset Parent Unit; Reset Baby Unit

36
Reset
On Parent Unit
To restore the parent unit to its default settings, you can reset it by inserting a pin
or paper clip into the RESET hole on the back of the parent unit and gently press
the button inside.
Alternatively, you can reset your parent unit by accessing the menu, selecting
>
Others, and finally choosing Reset Settings.
On Baby Unit
To reset the baby unit, press the PAIR key until you hear a beep sound. Release
the key and then short press it repeatedly until you hear the second beep.
Shortly after, the baby unit will emit the third beep, indicating that it is rebooting to
complete the reset process.