VTech RM5764HDV2 - Alerts and Screen Management; Screen Off Timer Settings; Adjust Sound Sensitivity Level

31
Sound, Motion, Temperature Alerts
Set Screen O󰀨 Timer
You can set a specic time interval, if no keys have been pressed on the parent
unit, the screen will turn off (goes to sleep) to save power. You can still hear
sounds from the baby unit when the screen turns o󰀨.
When
Auto
is selected, the parent unit screen stays o󰀨 to save power when the
baby unit detects sounds that are lower than the set sensitivity level. Once the
baby unit detects sounds that are louder than the set sensitivity level, the parent
unit screen turns on automatically. It will then turn o󰀨 again after 50 seconds if the
sounds detected are lower than the set sensitivity level.
1�
Go to
General Settings
menu.
2�
Go to
Screen O󰀨 Timer
.
3�
Select your desired timer (
1 min
,
3 min
or
5 min
) to turn the screen off, or
select
OFF
to keep the screen on always.
4�
Select to adjust the
Sound Sensitivity Level
.
Adjust Sound Sensitivity Level
Sound
Sensitivity Level
Low Medium High
Description The parent unit
screen turns on only
for loud crying or
screeching sounds
from your baby. The
parent unit screen
remains o󰀨 when
your baby makes soft
sounds.
The parent unit
screen turns on for
babbling and louder
sounds from your
baby. The parent
unit screen remains
o󰀨 when your baby
makes soft sounds.
The parent unit
screen turns on
for very quiet
sounds, including
background
noises from your
baby’s room.