3. Microphone
4. Infrared LEDs
• Allow you to see clearly in a dark surroundings.
5. Speaker
6.
• Press to turn the night light on or off.
7. LED indicator
• Orange is steady on when the baby unit is connecting to the parent unit in direct mode.
• Green is steady on when the baby unit and parent unit are connecting to your home Wi-Fi network via the Wi-Fi router.
• Flashes orange slowly during video streaming in direct mode.
• Flashes green slowly during video streaming via home Wi-Fi network.
8. ON
• Power on/off switch.
9. PAIR
• Press and hold for three seconds to enter pairing mode.
• Reset the baby unit to factory default.
1. Press and hold PAIR key until you hear
a beep sound.
2. Release the PAIR key, and then press the PAIR key again five times until you hear another beep sound.
3. The baby unit will sound another beep when the reset completes. Then, the baby unit will reboot.
10. Night light
11. Temperature sensor
12. Slots for wall mounting
• Wall mount bracket is included in your package.
13. Power jack
Parent unit overview
1. LINK LED light
• On when the parent unit is linked to the baby unit.
• Flashes when the link to the baby unit is lost.
2. LED light
• On when the parent unit is connected to AC power, and the battery is charging.
• Off when the parent unit is disconnected from AC power, or when the parent unit is connected to AC power and the battery is fully-charged.
• Flashes when the parent unit battery is low and needs charging.
3. 3- level sound indicator light
• Green on when low sound level is detected by the baby unit.
• Green and amber on when moderate sound level is detected by the baby unit.
• Green, amber and red on when high sound level is detected by the baby unit.
4. TALK /
• Press and hold to talk to the baby unit.
• While in a submenu, press to exit.
5.
• Press to zoom in/out.
To Next Page
Loading...
Need help?
General
