VTech Safe & Sound User Manual

Parent unit settings
26
Vibration
You can set the parent unit to vibrate once whenever there is any
sound detected from the baby units after 20 seconds of silence. The
vibration setting is preset to On if speaker is off.
To change the vibration setting:
Press MENU/SELECT when the parent unit is not in use.
Press or to choose VIBRATION, then press MENU/SELECT or .
Press or to choose On if speaker is off, Always on or Off.
On if speaker is off - The parent unit vibrates once whenever the baby
units detect sounds after 20 seconds of silence while the speaker of the
parent unit is turned off.
Always on - The parent unit vibrates once whenever the baby units
detect sounds after 20 seconds of silence.
Off - The parent unit will not vibrate even if the baby units detect sounds.
Press MENU/SELECT to confirm your selection. You hear a confirmation tone.
If you set the sensitivity level to Level 5 (Maximum) (see page 23),
the baby unit will be very sensitive and detect any sounds including
background noises. These background noises may disrupt the silence and
prevent the vibration feature to work properly.
If you set the vibration setting to On if speaker off or Always on, the
parent unit will vibrate once when you turn the speaker off.
Sound-activated screen
When the parent unit screen is turned off manually (see page 31),
you can set the screen to be turned on automatically whenever there
are sounds detected from the baby units after 20 seconds of silence.
The parent unit screen will turn off automatically when no sounds are
detected from the baby units within 50 seconds. The sound-activated
screen is preset to Off.
To turn the sound-activated screen on or off:
Press MENU/SELECT when the parent unit is not in use.
Press or to choose SOUND-ACTIVATED SCREEN, then press
MENU/SELECT or .
Press or to choose On or Off, then press MENU/SELECT to confirm your
selection. You hear a confirmation tone.
If you set the sensitivity level to Level 5 (Maximum) (see page 23),
the baby unit will be very sensitive and detect any sounds including
background noises. These background noises may disrupt the silence and
prevent the sound-activated screen feature to work properly.
The parent unit will turn on only if the sounds detected are from the last
viewed camera.
1.
2.
3.
•
•
•
4.
•
•
1.
2.
3.
•
•

VTech Safe & Sound Specifications

General

Brand	VTech
Model	Safe & Sound
Category	Baby Monitor
Language	English