Parent unit settings
28
Pair/unpair CAM (continued)
Unpair CAM
Make sure you power on the baby unit and the parent unit before
unpairing the baby unit.
To unpair a baby unit:
On the idle parent unit, press MENU/SELECT.
Press or to choose PAIR CAM, then press MENU/SELECT or .
Press or to choose a desired baby unit, then press and hold and
for 5 seconds.
When unpairing is successful, you hear a confirmation tone. The
corresponding baby unit slot shows CAM X(EMPTY). If there is no paired
baby unit, the screen displays No CAM paired.
Language
You can select a language (English, French or Spanish) to be
used in all screen displays. The screen display language is
preset to English.
To change the language:
Press MENU/SELECT when the parent unit is not in use.
Press or to choose LANGUAGE (LANGUE if French is set, or
IDIOMA if Spanish is set), then press MENU/SELECT or .
Press or to choose English, Français or Español, then press
MENU/SELECT to confirm your selection. You hear a confirmation tone.
1.
2.
3.
4.
1.
2.
3.
To Next Page
Loading...
Need help?
General
