31
View
You can change the screen to view images from different
baby units, or you can turn off the screen.
To view different baby units while in CAM X:
Press repeatedly to switch to the desired baby units.
The switching is in chronological order: CAM 1 to CAM 4.
To view different baby units while in Split CAM:
Press to enlarge the desired baby units.
The Split CAM mode resumes after a while.
To view different baby units while in Patrol mode:
Press repeatedly to switch to the desired baby units even if the
scanning period on a particular baby unit is not expired. The switching is in
chronological order: CAM 1 to CAM 4.
If the switching fails, the screen displays Waiting for linking... Make sure the
baby unit turns on. Try the switching again.
To turn the screen on or off:
Press and hold for 2 seconds to turn off the screen.
When the screen is turned off, press any key to turn it on.
Talk to the baby unit
You can broadcast messages from the parent unit to any
one of the baby units.
To talk to the baby unit:
Press to choose a desired baby unit.
Press and hold TALK when the parent unit is
viewing particular baby unit. Speak towards the MIC
(microphone) on the parent unit. The TALK light is on
when the voice connection to the baby unit is made.
Your voice is broadcast to the baby unit.
If the speaker volume of the parent unit is set to OFF, it will be reset to the
default volume after you press and hold TALK.
Lullaby playback is paused when the parent unit is talking the baby
unit. Lullaby playback resumes when the parent unit finishes using the
TALK feature.
•
•
1.
2.
•
•
Parent unit operation
To Next Page
Loading...
Need help?
General
