95
Answering system
Answering system setup
Call Screening
>On
Off
Ans Sys Setup
Remote Code
Msg Date/Time
Message Alert
Message Length
>Call Screening
Call screening
Use this feature to choose whether incoming messages
can be heard over the speaker when they are being
recorded. If you turn call screening on, you hear the
incoming message on your console when a call
comes in.
When the console is idle, press ANS SYS.
Press
or to scroll to Ans Sys Setup, then press
MENU/SELECT or /SKIP.
Press or to scroll to Call Screening, then press
MENU/SELECT or /SKIP.
Press or to choose On or Off.
Press
MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
Recording time
Use this feature to check the remaining recording time in the system.
When the console is idle, press ANS SYS.
Press
or to scroll to Record Time, then press
MENU/SELECT or /SKIP.
Press CANCEL to return to the previous menu.
1.
2.
3.
4.
5.
1.
2.
3.
Time left
60:00
To Next Page
Loading...
Need help?
General
