VTech UP416 User Manual

23
Your telephone can support up to 15 UP406 desksets. The desksets must be
connected to the console before use. You must connect each deskset separately.
Make sure your deskset is installed properly. Refer to the UP406 deskset user’s
manual for details. Start the connection when the deskset screen shows
IP obtained: XXX.XXX.X.X Press SELECT to proceed.
To connect a deskset to your UP416 console
The deskset should display IP obtained:
XXX.XXX.X.X Press SELECT to proceed before you
begin connection.
On the deskset, press
MENU/SELECT.
The deskset screen displays Enter the name of the
Console connecting to this phone. Press
MENU/SELECT.
The screen displays Console’s name:. The
console’s name is set as Console by default. If you
have changed your console’s name, enter the same
name using dialing keys on the deskset. Otherwise,
skip to step 5 to continue.
Press DELETE to delete a character.
Press
/REPEAT or /SKIP to move the cursor to
the left or right.
Press MENU/SELECT to save. The deskset screen
displays Please set an extension number to
this phone. Press
MENU/SELECT.
Press /REPEAT or /SKIP to choose the desired
extension number. The extension number ranges from
11 to 26. Press
MENU/SELECT to confirm.
The deskset screen displays Connecting to
Console... It takes up to 60 seconds to complete the
connection. The deskset screen displays Connected
to Console when the connection is successful.
1.
2.
3.
4.
•
•
5.
6.
7.
IP obtained:
XXX.XXX.X.X
Press SELECT
to proceed
Enter the name
of the Console
connecting to
this phone
Please set an
extension number
to this phone.
Set Ext No.
12
Getting started
Connecting desksets
Console’s name:
Console_

VTech UP416 Specifications

General

Brand	VTech
Model	UP416
Category	Telephone
Language	English