24
To connect a deskset to your UP416 console (continued)
The deskset screen displays Starting... It takes a
while for the system to finish the startup. The deskset
enters the idle screen when the startup is done.
Lift the handset. If you hear a dial tone, the connection
was successful.
NOTES:
If the connection is not successful, the deskset returns to the previous screen. Try the
connection process again.
Make sure you assign a unique extension number to the deskset.
If you want to replace a deskset and keep the same extension number, make sure you release
its extension number after disconnected from the console. See Release extension number on
page 30 .
8.
9.
•
•
•
Starting...
Getting started
Connecting desksets
To Next Page
Loading...
