VTech VCS704 - Ringer Tone; Set Date and Time

Settings
15
Ringer tone
You can choose from different ringer tones on the base unit.
Press
when the base unit is not in use.
Press
or until the base unit displays Ringers, and then press .
Press
to highlight Ringer tone, and then press .
The base unit displays RINGER TONE with the current setting. Press
or to
sample each ringer tone (Tone 1 to Tone 10).
Press
to save your selection. You hear a confirmation tone.
If you turn off the ringer volume, you will not hear ringer tone samples.
Set date and time
The date and time will be displayed on the base unit when idle. Before using the
ErisStation Wireless Conference Phone, set the date and time as follows. If you
subscribe to caller ID service, the day, month, and time are set automatically with
each incoming call. However, the year must be correct so that the day of the week
can be calculated from the call log information.
Press
when the base unit is not in use.
Press
or until the base unit displays Set date/time, and then press .
Press
or to select the month, and then press , or use the dialing keys to
enter a two-digit number (01-12).
Press
or to select the date, and then press , or use the dialing keys to
enter a two-digit number (01-31).
Press
or to select the year, and then press , or use the dialing keys to
enter a two-digit number (00-99), and then press
.
Press
or to select the hour, and then press , or use the dialing keys to
enter a two-digit number (01-12).
Press
or to select the minute, and then press , or use the dialing keys to
enter a two-digit number (00-59).
Press
or to select AM or PM.
Press to save the settings. You hear a confirmation tone.
The base unit beeps twice if you enter an invalid number.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
9.