22
23
Ringer volume
You can set the ringer volume or turn the
ringer off on each handset. When the
ringer is off, appears on the screen.
1. Press MENU when the handset is not
in use.
2. Press or to choose Ringers, and
then press SELECT.
3. Press or to select Ringer volume,
and then press SELECT.
4. Press or to sample each volume
level.
5. Press SELECT to save your selection.
Then the handset returns to
the previous menu. You hear a
confirmation tone.
• If the ringer volume is set to off, that
handset is silenced for all incoming calls
except paging tone.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset and telephone base without
disconnecting the call. The next call rings
normally at the preset volume.
• Press OFF or MUTE on the handset and
it displays Ringer muted and .
• Each handset and the base ring when there
is an incoming call unless the ringer volume
of that device is turned off.
Quiet mode
You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone) are
muted.
To set the duration and turn on the quiet
mode:
1. Press and hold
when the
handset is not in use.
2. The handset displays Quiet: _ _ hours.
Use the dialing keys (0-9) to enter the
desired duration (1-12).
3. Press SELECT to save. You hear a
confirmation tone. The handset
displays Quiet mode on and .
To turn off the quiet mode:
• Press and hold when the
handset is not in use. The handset
displays Quiet mode off briefly and
then returns to idle.
• When you change the settings of the ringer
tone or ringer volume, you can still hear the
samples even if the quiet mode is on.
Retrieve voicemail from
telephone service
Voicemail is a feature available from most
telephone service providers. It may be
included with your telephone service, or
may be optional. Fees may apply.
Retrieve voicemail
When you received a voicemail, the
handset displays New voicemail
and .
To retrieve, you typically dial an access
number provided by your telephone
service provider, and then enter a
security code. Contact your telephone
service provider for instructions on how
to configure the voicemail settings and
listen to messages.
• After you have listened to all new voicemail
messages, the indicators on the handset
turn off automatically.
Set your voicemail number
You can save your access number on each
handset for easy access to your voicemail.
After you saved the voicemail number,
you can press and hold to retrieve
voicemail.
1. Press MENU when the handset is not
in use.
2. Press or to choose Settings, and
then press SELECT.
3. Press or to choose Voicemail #,
and then press SELECT.
4. Use the dialing keys to enter the
voicemail number (up to 30 digits).
5. Press SELECT to save. You hear a
confirmation tone.
Clear the new voicemail indicators
If you have retrieved your voicemail while
away from home, and the handset still
displays the new voicemail indicators, use
this feature to turn off the indicators.
• This feature turns off the indicators only, it
does not delete your voicemail messages.
1. Press MENU when the handset is not
in use.
2. Press or to choose Settings, and
then press SELECT.
3. Press or to choose Clr voicemail,
and then press SELECT twice. You hear
a confirmation tone.
To Next Page
Loading...
