EasyManua.ls Logo

VTech VT1040 - Keypad Lock; Ringer Volume On;Off; Page the Handset(S)

VTech VT1040
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Keypad lock
You can lock the keypad to prevent accidentally dialling
numbers while carrying the handset around.
1. Press and hold for 1.5 seconds until the icon
is displayed.
2. To unlock the keypad, press and hold again.
Ringer volume on/off
1. Press and hold for 1.5 seconds to switch the ringer on or off.
If you switch the ringer off, the icon will be displayed.
Page the handset(s)
You can alert handset users that they are wanted or locate a
missing handset.
1. Press on the base. The handset(s) beep.
2. Press on the base again or press on the handset to
stop the handset beeping.
Using the phone
When the keypad is locked incoming
calls can still be answered. Once the
call has ended, the keypad lock is
re-activated.
IMPORTANT
Emergency calls CANNOT be made
when the keypad lock is on.
You cannot answer the beeping
handset as you would a call.
Stopping the beep at a handset stops
the beep at that handset only.
18

Related product manuals