VTech VT1040 - Handset Name; Display

Handset name
You can give each handset a name up to a maximum of
11 characters, for example “Kitchen”. It will still display
its number.
1. Press the Left soft key
to open the main menu.
2. Press or until the display shows
HS SETTINGS and
press
OK .
3. Press or until
HS NAME is displayed, press OK
to select.
4. Press
C to delete characters and use the keypad to enter the
name you want, then press
OK to confirm.
5. Press and hold
to return to standby.
Display
You can choose to display the handset name or the time in the
standby screen.
1. Press the Left soft key
to open the main menu.
2. Press or until the display shows
HS SETTINGS and
press
OK .
3. Press or until
DISPLAY is displayed, press OK
to select.
Handset settings
27