Help
If you experience any problems, please call the VTech Technical Support hotline:
(852)2667 7433
Handset not registering?
Is
SEARCHING
displayed on the handset?
Check that the base is plugged into the mains power and switched on.
Check that there are charged batteries in the handset and that they are fitted correctly.
Forgotten your PIN number
Try entering the default PIN = 0000. If you have changed the number and cannot remember it,
contact the VTech Technical Support hotline: (852)2667 7433
No display
Check that the handset batteries are charged and correctly fitted.
If necessary, replace the batteries.
Nothing happens when you press any button
Is the icon displayed? If so, the key lock is on, press and hold for 1.5 seconds to
unlock the keypad.
No connection between handset and base
You may be out of range, is the icon flashing? If so, move closer to the base.
35
To Next Page
Loading...
Need help?
General
