Receive a call
When you receive a call, the phone rings. The display shows
the caller’
s number if available or the caller’s name if it
matches an entry in the phonebook. If you do not have a
Caller Display service, the screen shows
External call
.
1. Press .
Call Waiting
Providing you have subscribed to your network’s Call Waiting
se
rvice and it is switched on, your VT9011 will alert you
to a second incoming call while you are already engaged on an
external call.
1. You will hear the call waiting tone and the display will show
the number of the caller, or the name if it matches an entry in
your directory.
2. Press to answer the new call and your first caller is put
on hold.
3. Press to toggle between the two callers.
4. Press to hang up the current call.
Using the phone
BT Verve 450 – Edition 4 – 14.05.07.07 – 8179
Aut
o answer
As long as you have auto answer set to
ON you can answer a call by lif
ting the
handset off the base. If you have
switched auto answer off, you will
need to press as well. Auto answer
ON is the default setting.
8179 Verve 450 UG [4] 14/5/07 16:06 Page 17
11
To Next Page
Loading...
Need help?
General
