VTech VT9011 User Manual

Handset priority
1. Press
Menu , scroll to Settings and press OK .
2. Scroll to
Base settings . Press OK .
3. Scroll to
H/set priority . Press OK .
4.
All handsets is highlighted. Press OK for all handsets to
ring together.
Or
Scroll to
Select handset . Press OK then press
or to select the handset you want to ring first. Press
OK .
The ring delay option is highlighted. Press or to set
the number of rings before the other handsets ring. Press
OK .
5. Press
Back to return to the previous menu.
Dialling mode
1. Press
Menu , scroll to Settings and press OK .
2. Scroll to
Base setting . Press OK .
3. Scroll to
Dial mode . Press OK .
4. Press or to select the dial mode option you want.
5. Press
OK to save.
6. Press
Back to return to the previous menu.
Settings
BT Verve 450 – Edition 4 – 14.05.07.07 – 8179
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
When you have more than one
handset r
egistered to your base, you
can set one handset to ring before the
others. This allows one handset user to
answer all incoming first, like a
receptionist.
Choose All handsets if you want all
handset t
o ring at the same time or
Select handset to nominate a
handset t
o ring before the others.
The dial mode options are Tone Plulse.
You should not normally need to adjust this
setting unless advised to do so.
8179 Verve 450 UG [4] 14/5/07 16:06 Page 33
27

VTech VT9011 Specifications

General

Brand	VTech
Model	VT9011
Category	Cordless Telephone
Language	English