VTech VT9011 User Manual

BT Verve 450 – Edition 4 – 14.05.07.07 – 8179
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
4. Scroll to Ans & Rec or Answer only and press OK .
5. Your message is then played back. If you want to delete it,
press
Delete during playback. Or press OK to save.
Answer settings
1. Press
Menu . Scroll to Answer machine . Press OK .
2. Scroll to
Ans. settings and press OK .
3. Press or to select the outgoing message type,
Answer only or Ans & Rec .
4. Scroll to
Answer delay . Press or to select
the setting.
5. Scroll to
Recording time . Press or to
select the maximum message length, 30, 60, 120 or 180
seconds.
6. Scroll to
Call screening . Press or to
select
On or Off .
7. Press
OK to save.
8. Press
Back to return to the previous menu level.
Answering machine
You cannot delete a pre-recorded
message. If you delete your Personal
OGM the pre-recorded OGM will be
automatically reinstated as your
outgoing message.
Answer mode
Choose which outgoing message you
want played t
o callers.
Answer delay
Answer delay sets the number of times
your
VT9011 will ring before the
answer machine picks up your call and
starts playing the outgoing message.
You can change the Answer Delay
setting to between 2, 4, 6, 8 rings or
Time Saver.
Time saver
When you ring in to access your
messages r
emotely, if your answering
machine is set to time saver and you
have new messages it will answer after
10 seconds, if you do not have any
new messages, it will answer after 20
seconds. This means you can hang up
knowing you have no new messages,
saving you time and the cost of the call.
Recording time
Set the maximum message length:
60, 120 or 180 seconds or unlimit
ed.
8179 Verve 450 UG [4] 14/5/07 16:06 Page 46
38

VTech VT9011 Specifications

General

Brand	VTech
Model	VT9011
Category	Cordless Telephone
Language	English