BATTERY INSTALLATION
3
Unlock the packaging locks:
1. Rotate the packaging locks 90 degrees anti-clockwise
2. Pull out the packaging lock
Demo strip removal:
When the product is taken out of the packaging, please remove the demo strip from the
unit to activate normal play mode.
GETTING STARTED
POWER SOURCE
The VTech
®
Xtra Pro Laptop operates on 4 “AA” size batteries (AM-3/LR6) and 1
“CR2032” size battery, or a VTech
®
7.5V 400mA or 9V 300mA adaptor (sold separately).
BATTERY INSTALLATION
NOTE: For best performance, remove all factory-installed batteries
and use new, alkaline batteries.
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit and open it.
3. Insert 4 new “AA” batteries (AM-3/LR6) as illustrated.
4. Close the battery cover.
IMPORTANT: When replacing the 4 “AA” size batteries, make sure the backup battery is
in the unit. Otherwise you will lose any information stored in the unit.
BACKUP BATTERY INSTALLATION
Your VTech
®
Xtra Pro Laptop comes with a backup battery already installed. To avoid damage
to the unit from leaky batteries, replace the backup battery at least once a year.
TO REPLACE THE BACKUP BATTERY
1. Make sure the unit is OFF.
2. Using a small cross-head screwdriver, loosen the battery cover.
3. Insert 1 CR2032 size battery as illustrated.
4. Close the battery cover and tighten the screw to secure it.
IMPORTANT:
While replacing the backup battery, the 4 “AA” size batteries must be kept in
the unit. Otherwise,
you will lose any information stored in the unit.
BATTERY NOTICE
• Theuseofnewalkalinebatteriesisrecommendedformaximumperformance.
• Non-rechargeablebatteriesarenottoberecharged.
• Rechargeable batteries are to be removed from the toy before being charged (if
removable).
• Rechargeablebatteriesareonlytobechargedunderadultsupervision(ifremovable).
To Next Page
Loading...
