VTI Instruments Corp.
132 EX1200 Triggering
BLINK LAN INDICATOR
This action page is used to identify the EX1200 that is being commanded in the current session.
When the Turn on button is pressed, the LAN LED located on the front panel of the EX1200 will
blink. When the Turn off button is pressed, the LAN LED returns to its normal operation.
FIGURE 7-20: DEVICE IDENTIFY WEB PAGE
CHANGE PASSWORD
Once connected to the EX1200, the user should define a password. No password is defined by
default. To create a password, click on the Change Password link in the command menu, then
enter the desired password in both text fields. From this point forward, pages that modify
instrument configuration (e.g., SFP) require this password to initially login. It is only necessary to
enter a password once per session.
FIGURE 7-21: EX1200 PASSWORD PAGE
To Next Page
Loading...