VTI Instruments Metek EX1202 - Page 51

www.vtiinstruments.com
EX1200 Series Preparation for Use 51
Rack Ear Installation Option (P/N: 70-0370-101)
The rackmount installation option includes all the parts necessary to mount an EX1200 system to
the front of a standard test rack.
Required Tools
1) #2 Phillips screwdriver
Parts List
Item#
Qty
Description
VTI P/N
1
2
Bracket, Rack Ear, EX1267/68/69
41-0494-010
2
2
Handle, 0.25 dia x 1.25 H X 4.0 L, 8-32, Aluminum, Black
37-0254-000
3
4
Screw, 8-32 x 1/2", Flat Head Phillips, 82°, Stainless Steel
37-0129-050
4
8
Screw, 6-32 x 3/8", Flat Head Phillips, 82°, Stainless Steel
37-0173-037
Assembly Procedure
1) Place the chassis on a protected work surface with its input connectors facing front.
2) Using a #2 Phillips screwdriver, install the rack ears (P/N: 41-0482-009) on the front of the
EX1200 using four (4) 6-32 x 3/8” flat head Phillips stainless steel screws (P/N: 37-0173-037)
for each rack ear.
3) Install the handles (P/N: 37-0254-000) using two (2) 8-32 x 1/2" flat head Phillips screws.
FIGURE 2-12: RACK EAR INSTALLATION DIAGRAM (EXPLODED FRONT VIEW)