2
S 0% 10% 25% 50% 75% 100%
Indicator Unlit 4 Flashing 1 lighting 2 lighting 3 lighting 4 lighting
torage level
1.Storage Level Indicators
Press the switch to check the Jump Starter's battery level
B. OPERATION GUIDANCE
The indicator will flash sequentially while the Jump Starter is charging.
The number of lit indicators corresponds to the Jump Starter's storage
level. Once fully charged, all indicators will turn off.
Epower Charging Instruction:
1、Connect the USB cable with the home adaptor and then plug
the home adaptor into the universal socket.
2、Connect the USB-C connector to the V10 PRO host.
1. Fully insert the blue plug into the host.
2. Attach the Red Clamp to the positive (+)
battery terminal and the Black Clamp to the
negative (-) battery terminal.
3. Follow the Cable Indicator's instructions for
operation:
Instruction for Jumping start 12V vehicle(by Intelligent jumper
cable):
To Next Page
Loading...
