4.2. NEC Adaptor mode
Renew/Write new key file via NEC adaptor
Support versions:
v51, v57
v28, v35, v40
v03, v06, v08 (Keyless Go)
v05, v07, v09 (Keyless Go)
v59, v61 (Keyless Go)
The above keys all with NEC chip (not BGA type). You need solder the NEC chip from key
and place it to NEC adaptor
For NEC v51, v57 version, support read password from working key directly, no
need read password from EIS
For all NEC types, you must use “Identification key” to read one time before
renew/write key
To Next Page
Loading...