8.2. ESL Basic Information
ESL P/N: ESL part number, the front 3 characters is the main type, example: W204
ESL S/N: ESL serial number
HW: ESL hardware version
SW: ESL software version
VIN： VIN stored in ESL. Attention: only last 14 characters
Write VIN: Support write VIN to ESL without activated status
Initialized: Selected means ESL was already initialized
TP Cleared: Selected means TP was cleared. You can’t write data to ESL without TP
cleared
Personalized: Selected means already written car information, insert working key
will activate ESL automatically
Activated: Selected means this ESL already have working key. You can’t write data
to EIS with activated status
8.3. ESL Key Information
Key Password: Key password use for EIS to recognize working key. It is also stored in
ESL
Paste key password: You can paste your password here directly
Erase Password: Renew activated ESL to new one
Get erase password: First read ESL, then press button “Get”, get erase password online
Special Key: A special key stored in ESL. Normally it is same with EIS special key
SSID： You can’t read this from ESL. When you write ESL, it need this value
Key 1 – Key 8: Key track (hash) for every key. Normally it is same with EIS key track
To Next Page
Loading...