9. Renew ECU/Gearbox
This function support renew, write VIN, personalization operation for module ECU,
Gearbox, ISM etc
9.1. Functions
1. Module: Support ECU, Gearbox, ISM etc
2. Read: Read key information, unit status and other diagnostic information. Require
connect unit with CAN separately
3. Save File…: Save the read data to file
4. Load File…: Load the saved file
5. Write VIN: Write VIN to unit
6. Get Erase Password: Get erase password online after success read module
information
7. Renew: Input correct erase password, renew 2
nd
hand unit to a new one. Require
connect unit with CAN separately
8. Personalization: Personalize unit to new car. Requires module placed on car
9. Advanced function: Only gearbox has this function. Support renew gearbox without
erase password, see chapter 9.2
To Next Page
Loading...