9.2. Advanced Functions
Support Read/Write gearbox special EEPROM. Support set unit status while write data.
That means you can renew gearbox without erase password
1. Read: Read module special EEPROM
2. Save File…: Save the read EEPROM file
3. Load File…: Load the saved EEPROM file
4. Write: Write EEPROM to unit，it will set the selected status to module
5. Set unit status: Set unit status, you can set status to unit by write once
Set Activated: Will set Initialized, TP Cleared, Personalized, Activated status
Set Personalized: Will set Initialized, TP Cleared, Personalized status; not set
Activated status
Set TP Cleared: Will set Initialized, TP Cleared status; not set Personalized,
Activated status
Set Initialized: Will set Initialized status; not set Cleared, Personalized, Activated
status
To Next Page
Loading...