5. Reset the fuse seat
Replace the fuse seat in the power socket. Push the fuse case by using the screwdriver, and turn it clockwise,
the fuse seat will be locked when released.
6. Switch on the power
Plug the socket and switch on the power.
User replaceable accessories and spare parts
CELL HOLDER, 4-CELL, 10MM
CELL HOLDER, 4-CELL,10 TO 50MM
CELL HOLDER, 4-CELL, 10 TO 100MM
CELL HOLDER, FOR CYLINDRICAL CELL
CELL HOLDER, WATER-JACKETED, 1 CELL, 10MM
CELL HOLDER FOR MICRO CELLS,BEAM HEIGHT:15MM
CELL HOLDER FOR TEST TUBES, D=16mm
CELL HOLDER,5-POSITION AUTO CELL CHANGER, 10 TO 100MM
CELL HOLDER,8-POSITION AUTO CELL CHANGER, 10MM
CELL HOLDER, SOLID SAMPLE
CELL HOLDER, WATER-JACKED, 4 CELL, 10MM
CUVETTE, SQUARE.GLASS,10MM
CUVETTE, SQUARE.GLASS,20MM
CUVETTE, SQUARE.GLASS,30MM
CUVETTE, SQUARE.GLASS,50MM
CUVETTE, SQUARE.GLASS,100MM
CUVETTE, SQUARE.QUARTZ,10MM
CUVETTE, SQUARE.QUARTZ,20MM
CUVETTE, SQUARE.QUARTZ,30MM
CUVETTE, SQUARE.QUARTZ,50MM
CUVETTE, SQUARE.QUARTZ,100MM
CELL,QUARTZ, 100UL, 10MM, BEAM HEIGHT:15MM
CELL,QUARTZ, 200UL, 10MM, BEAM HEIGHT:15MM
FLOW CELL, 5 MM, GLASS, BEAM HEIGHT:15MM
FLOW CELL, 10 MM, GLASS, BEAM HEIGHT:15MM
FLOW CELL, 20 MM, GLASS, BEAM HEIGHT:15MM
FLOW CELL, 30 MM, GLASS, BEAM HEIGHT:15MM
FLOW CELL, 5 MM, QUARTZ, BEAM HEIGHT:15MM
To Next Page
Loading...
