VWR M4 - Package Contents; Unpacking; Installation; Intended Use

Package Contents
Description
Quantity
Catalogue-No
Spectrophotometer
1PC
634-1087
Glass Cuvette
4PCS
634-6013
Quartz Cuvette
2PCS
634-6018
Power Cord ( Euro Plug )
1PC
on request
Power Cord ( UK Plug )
1PC
on request
Power Cord ( CH Plug )
1PC
on request
Software CD-ROM
1PC
N/A
USB Cable
1PC
N/A
Instruction Manual
1PC
N/A
Dust Cover
1PC
on request
Unpacking
Open the package, according to carefully check the packaging packing list items, if found inside the packaging are
missing or damaged items please contact your local VWR office and authorized contractual partners.
Installation
Placement
Place the instrument on the stable table carefully.
Install printer (Optional)
Check to confirm instrument power switch is turned off, connect the printer’s data cable to the Instrument’s
serial/USB port.
Connect the power cord
Check to confirm instrument power switch is turned off, the power cord plug into two separate power interface and
power supply socket apparatus.
Intended use
For research use only. Not intended for any animal or human therapeutic or diagnostic use.
Symbols and conventions
The following chart is an illustrated glossary of the symbols that are used in this manual.
CAUTION This symbol indicates a potential risk and alerts you to proceed with caution^
CAUTION This symbol indicates the presence of high voltage and warns the user to proceed
with caution
CAUTION This symbol indicates risks associated with hot surfaces
Product Specifications
Optical System
Spilt Beam
Wavelength Range
190-1100nm
Band Width
2nm
Stray Light
≤0.08%T @ 220nm & 360nm
Photometric Range
0 to 200%T, -0.3 to 3.0A, 0 to 9999C
Wavelength Accuracy
±0.5nm
Photometric Accuracy
±0.4%T or ±0.004A @ 1A
Stability
0.002A/h @ 500nm