VWR MEGA STAR 3.0 - Aerosol-Tight Rotors; Aligning the Centrifuge

22 VWR MEGA STAR 3.0 / 3.0R ver b, rel 25.06.2020
Figure 5. Removing the Rotor
Aerosol-tight rotors
When using an aerosol tight lid, the rotor can be removed with the lid closed. This is to protect you and the
samples.
CAUTION Rotors supplied with a lid for aerosol-tight applications come with a mandrel, which
belongs to the Auto-Lock. Be sure not to place the lid onto this mandrel to prevent it from being
damaged.
Figure 6. Auto-Lock- for aerosol-tight rotors
WARNING Mind the Auto-Lock-mandrel inside the lid. Do not touch the mandrel.
Aligning the Centrifuge
• To turn off the centrifuge put the mains switch to "0".