EasyManua.ls Logo

VWR MICRO STAR 17 - Intended Use; Accident Prevention

VWR MICRO STAR 17
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preface
iv MICRO STAR 17 / 17R VWR
Intended Use
This centrifuge is a laboratory product designed to separate components by generation of a relative
centrifugal force. It separates human samples (e.g. blood, urine and other body fluids) collected in
appropriate containers, either alone or after addition of reagents or other additives.
As general-purpose centrifuge, it is designed to also run other containers filled with chemicals,
environmental samples and other non-human body samples.
The centrifuge is to be used for separating materials of different density or particle size suspended
in a liquid.
Maximum sample density at maximum speed: 1.2
Accident Prevention
g
cm
3
-----------
WARNING If a hazardous situation occurs, turn off the power supply to the centrifuge
and leave the area immediately.
WARNING Plug the centrifuge only into sockets which have been properly grounded.
Prerequisite for the safe operation of the VWR MICRO STAR 17 / 17R is a work
environment in compliance with standards, directives and trade association safety
regulations and proper instruction of the user.
The safety regulations contain the following basic recommendations:
Maintain a radius of at least 30cm around the centrifuge.
Implementation of special measures which ensure that no one can approach the
centrifuge for longer than absolutely necessary while it is running.
The mains plug must be freely accessible at all times. Pull out the power supply plug or
disconnect the power supply in an emergency.

Related product manuals