VXI B250-XT - Pairing with a Computer

PAIRING WITH A COMPUTER
VXi BlueParrott
®
B250-XT+ User Guide
11
Keepheadsetandcomputernolessthan3inchesandnomorethan3feetapartwhilepairing.
KeepallotherBluetoothdevicesatleast50feetaway,orturnthemoff.
1. Turn headset off (page 9).
2. Open the computer’s Bluetooth connection manager.
3. Put headset into pairing mode (page 10).
4. Instruct Bluetooth connection manager application to discover Bluetooth device. Enter the
passcode “0000” when prompted.
5. Wait while the devices discover each other. This could take up to 2 minutes. Once paired the
headset’s blue light will flash.
6. After pairing is complete, a headset icon will appear in the computer’s Bluetooth connection
manager window. To connect the headset, use the mouse to right click on the headset icon
and select “connect.” Once connected you should hear the voice prompt, “Your headset is
connected.”
7. To disconnect, use the mouse to right click on the headset icon and select “disconnect” or
power off the headset. If you select disconnect you should hear the voice prompt,
“Your headset is disconnected.”