VXI B250-XT - Making a Call

MAKING A CALL
VXi BlueParrott
®
B250-XT+ User Guide
17
If you have not paired the headset and phone together yet, you must do so (page 10).
1. Turn on your cell phone. Be sure the Bluetooth option is enabled on your phone (refer to your
phone’s user guide for instruction).
2. Put headset on and properly position the microphone (page 16). To turn headset on, press
MFB for 2-3 seconds. The headset will automatically attempt to connect with the last device
it was paired or connected with. Once connected you should hear the voice prompt, “Your
headset is connected.”
3. Dial the phone and make a call as usual. Or use the headset’s Voice Dial function (page 20)
to make a call.
 4. Toendcall,quicklypresstheMFBontheheadsetandrelease.Youwillhearavoiceprompt,
“Call terminated.” The call will end and the headset will enter Standby Mode.