VXI B250-XT - Multipoint Mode

13
MULTIPOINT MODE
VXi BlueParrott
®
B250-XT+ User Guide
Multipoint Mode allows you to pair and switch between two Bluetooth devices.
ENABLING MULTIPOINT MODE
1. Turn the headset on (see page 9). It will display a blinking red light and you will hear a voice
prompt, “Power on.”
 2. WhilepressingtheMFBbutton,quicklypresstheVolumeUpandVolumeDownbuttonsat
the same time, and then release all buttons.
3. You will hear 4 rising tones.
4. Once Multipoint Mode is active, shut the headset off.
PAIRING the B250-XT+ HEADSET to the FIRST BLUETOOTH DEVICE
5. Get the first Bluetooth device ready to pair to the headset.
6. Put the headset in Pairing Mode (see page 10).
7. Once the first Bluetooth device is connected, shut off the device and the headset.