40
Index
7. 3-spoke hub for Y-axis transversal travel order no. 24464 52
7.1 Assembly 52
7.2 Drawing and legend 52
8. Machine support order no. 24460 53
8.1 Assembly 53
8.2 Drawing and legend 53
9. Clamping device order no. 22312 53
9.1 Assembly 53
9.2 Drawing and legend 53
10. Turning jig for drilling milling stands 54
10.1 Assembly for turning between two centers 54
10.2 Drawing for turning between two centers 54
10.3 Assembly for turning with a face plate 55
10.4 Drawing for turning with face plate 55
11. Hand steel rest order no. 24480 56
11.1 Assembly 56
11.2 Operation 56
11.3 Drawing and legend 56
12. 4-spur center order no. 24486 57
12.1 Operation 57
12.2 Drawing and legend 57
13. Tailstock center order no. 24484 58
13.1 Operation 58
13.2 Drawing and legend 58
14. Face plate order no. 24482 59
14.1 Operation 59
14.2 Drawing and legend 59
15. Tapping attachment order no. 35805 60
15.1 Operation 60
15.2 Drawing and legend 61
16. 2-axis coordinate table K400 and K600 62
16.1 Assembly 62
16.2 Lubrication 62
16.3 Re-adjust the guides 62
16.4 Working instructions 62
16.5 Drawing and legend 63
16.6 Mounting kit for mountable vernier scales for 2 axes and spindle Y-axis 66
16.6.1 Replacement of the spindle Y-axis 66
16.6.2 Mounting the bracket for the mountable vernier scales 68
16.6.3 Mounting the mountable vernier scale Y-axis 71
16.6.4 Mounting the mountable vernier scale X-axis to K400 72
16.6.5 Mounting the mountable vernier scale X-axis to K600 73
16.6.6 Drawing and legend 74
To Next Page
Loading...
