10 Use and operation
31
10.2 Adjusting the machine
Machine with integrated shut-off device – RS (optional)
The machine only works when either the plug of the remote cut-off or the shorting
plug is plugged in at the connection socket of the integrated shut-off device.
Operation with remote cut-off
If you wish to operate the machine via an external remote cut-off:
1. Remove the shorting plug from the connection socket.
2. Plug the shorting plug into the handle opposite so that it does not get lost.
The machine is now ready for operation with the remote cut-off. For further infor-
mation, see the remote cut-off operator's manual.
Operation without remote cut-off
If you wish to operate the machine without an external remote cut-off:
1. Remove the shorting plug from the handle opposite.
2. Plug the shorting plug into the connection socket.
The machine is now ready for operation with the remote cut-off.
Item Designation Item Designation
1 Shorting plug 3 Handle
2 Shorting plug
To Next Page
Loading...
Need help?
General
