Maintenance
Safety instructions for maintenance 9.1
WARNING
Risk of injury due to missing or non-functioning safety
devices!
► Only operate the machine if the safety devices are correctly in-
stalled and functioning.
► Do not change or remove safety devices.
CAUTION
Danger of burns due to hot surfaces!
The machine, engine and exhaust can heat up quickly after a short time;
that can lead to severe burns in case of contact with skin.
► Always allow the machine, engine and exhaust to cool down after
use.
► Use heat-resistant protective gloves if the cooling phase cannot be
maintained (e.g. due to an emergency).
CAUTION
Health risk from fuel, lubricants and coolants!
► Do not inhale vapors.
► Avoid skin and eye contact.
NOTICE
Engine damage from operating the engine without an air fil-
ter!
If the engine is operated without an air filter, there is a risk of rapid en-
gine wear.
► Do not operate the engine without an air filter or air filter cover.
Environment
Soil contamination due to oil leaking or overflowing.
► Line work surface with impermeable foil.
► Use collecting container for used oil.
► Dispose of used oil in an environmentally friendly manner in ac-
cordance with statutory regulations.
Environment
Avoid damage to the environment!
► Clean the machine in a suitable place where the dirty waste water
can be collected in an environmentally friendly manner.
► Collect contaminated water and dispose of it in an environmentally
friendly manner.
[en] | Version: 5 | 01/2023 | 5100060577 | BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A | BPS | Operator’s
Manual 39
9
To Next Page
Loading...
